Question: How Do You Strip Thick Copper Wire By Hand?

Is it worth stripping copper wire for scrap?

If you chose to strip it, you will end up with 90 pounds of copper don’t forget 10 pounds in plastic waste and in today’s market you will get $1.90 per pound for stripped copper wire so your 90 pounds will net you $171.00 difference of $21.00 between stripping it or selling the way it is, just want to mention one thing ….

What is the easiest way to cut copper wire?

Wire stripping pliers are great for little to medium wires. Make sure you’ve got a cutter with nice heavy duty handles. Blunt nosed linesmen pliers are traditionally used for cutting fence wire. an honest heavy pair can cut copper wire up to 1/4 of an in.

What is the difference between copper wire and magnet wire?

Both wires are same by conduct, but the magnet copper wire is specially coated with thin and high heat absorbing material. … Magnet wire is coated with an enamel insulation vs a plastic or rubber coating. This makes the insulation thinner and allows for a more compact winding and hence denser magnetic field in the coil.

How do scrap yards strip copper wire?

Five Ways to Strip Copper WireBurn the insulation off in a fire. Technology Level: Dinosaur Scrapper. … Remove the insulation with a sharp knife. … Strip the insulation with a homemade gadget. … Cleaning wire with a manual wire stripping machine. … Strip that wire and build your scrap metal business with a StripMeister Original Automatic Wire Stripping Machine!

How do you dissolve enamel?

Common ways of removing the insulation on enameled wire include:Scraping the enamel carefully off with a sharp knife or blade, while trying not to nick the underlying metal wire.Melting the enamel off with a hot soldering iron in a quick motion so as not to cause a blob of carbonized enamel to stick to the wire.More items…

How do you make copper wire at home?

Look at the base of the TV and monitors. Simply snip off with scissors. Most electronics have insulated wires inside the metal housing, including laptops, printers, radios, and DVD players. Once you’ve opened up the item, you will find thin insulated copper wires running throughout.

How do you strip thick copper wire?

Hold the utility knife so that the cutting edge of the blade is away from the vise and the point of the blade is buried through the insulation all the way to the copper. Hold the knife and wire in both hands, fingers near the blade to steady it, and then walk backwards away from the vise.

How much is a copper wire worth?

CopperCopperPrice/lb.Bare Bright Wire (stripped/shiny)$2.40#1 Tubing (clean tube/ clean fine wire)$2.30#2 Tubing (paint/solder/burnt wire)$2.15Tin Plated (wire/bus)$2.154 more rows

Can you melt pennies and sell the copper?

But in the weird world of penny hoarding, getting to the copper is a very big problem. It’s illegal to melt pennies an there is an obscure federal law that makes it illegal to transport more than $5 in pennies out of the country.

Can you burn copper wire to strip it?

NO BURNING: First and foremost, we would like to reiterate that you should NEVER under any circumstances “burn” your copper wire to remove the insulation. Not only does it harm the environment from the fumes, but it will downgrade your copper at the scrap yard.

What can I use instead of a wire cutter?

You can cut through standard household wire with a knife or saw, or an axe, or scissors, or a clever or even a hammer and a flat blade screwdriver. If you absolutely need to cut a wire, not that hard. But a pair of side cutters are pretty cheap and readily available.

Can you cut wire with pliers?

Diagonal cutting pliers have a sharp, rounded tip, making them great for stripping and cutting wire. You can use these for nearly any type of wire. Diagonal cutting pliers are also widely used for removing pins and nails as well. If you want to cut a wire hanger, for example, this is a good option.

What is number 1 Bare Bright copper?

Bare Bright Copper Also referred to as “bright & shiny copper,” it is the most valuable and high-paying grade around. It refers exclusively to bare, uncoated and unalloyed wire or cable – no thinner than 16 gauge in thickness – which is of #1 copper quality. Copper piping is not included within the classification.

Should I strip wire before scrapping?

Not Properly Preparing Your Materials. Scrap yards will never encourage you to strip your copper wire when you bring it in. That’s because they don’t have to pay you as much for the copper wire when it’s not stripped! Get the most out of your copper wire by taking the extra time and stripping it!